Book a site visitCall us

Marble Polishing & Restoration

Onyx Stone Cleaning in Al Maqtaa and Bain Al Jessrain

Onyx is soft, often backlit and easily etched by acids. We clean it with pH neutral products and soft pads, and treat dull or etched areas by hand after testing. The MELLS carries this out in Al Maqtaa with its own directly employed team and a named supervisor. A supervisor visits first, and the written quotation follows before any work begins.

Quotation
Written, after a visit
Response
By appointment
Quality checks
14 on every job
Service
Gold rated

5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday

Onyx Stone Cleaning in Al Maqtaa and Bain Al Jessrain, The MELLS Property Care

Book a site visit

A supervisor from The MELLS visits, looks at the work and sends you a written quotation. Visits across Dubai and Abu Dhabi, Monday to Saturday.

Or send it on WhatsApp

No obligation. We call you to confirm the time. Prefer to talk? +971 55 444 0084

Onyx Stone Cleaning at a glance

ServiceOnyx Stone Cleaning
LocationAl Maqtaa and Bain Al Jessrain, Abu Dhabi
Property typesVillas and apartments
QuotationIn writing, after a site visit and before any work begins
Typical durationOne to three days for most homes
TeamCrew directly employed by The MELLS, with a named supervisor
Quality checkA measured test for every job, with photographs before and after
If a check failsIt is put right free of charge within 48 hours
ResponseVisits in Abu Dhabi by appointment, Monday to Saturday
Hours08:00 to 19:00, Monday to Saturday
BookingBook a site visit on this page, call +971 55 444 0084 or email contact@themells.ae

What is included

Grinding, honing, crystallisation and sealing for marble, travertine and terrazzo, gloss metered to 85 GU. Marble dulls because the surface is scratched and etched, not because it is dirty. We restore the stone with diamond abrasives, bring back the shine and seal it against the next spill.

How we carry out onyx stone cleaning

Onyx is used for statement pieces: backlit bar fronts, vanity tops, feature walls and the occasional floor inlay. It is a translucent calcite stone, softer than most marble, and many slabs are backed with mesh and filled with clear resin in their natural cracks. Lemon juice, vinegar, perfume and many bathroom cleaners etch it, leaving dull patches that look like water marks. Hard water spots are common on vanity tops. The supervisor checks the surface, the fills and any lighting behind it before cleaning.

Cleaning uses a pH neutral stone cleaner, warm water and soft microfibre or white pads, never scouring powder or a green abrasive pad. On backlit panels the lighting is switched off so the stone is cool and the electrics stay dry. Light etching and dullness are worked out by hand with a fine polishing compound, tested first on a small area, because heavy machine polishing can cut through a thin slab or soften the resin. Where the onyx is unsealed, a penetrating sealer goes on last.

How it works

The same method on every job, so the result does not depend on who is on shift.

  1. Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
  2. Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
  3. Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
  4. Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
  5. Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.

Talk to a supervisor about onyx stone cleaning today.

Why choose The MELLS for onyx stone cleaning

What an ordinary job leaves out, and what you can hold us to.

PointAn ordinary jobThe MELLS
QuotationA figure over the phone, with extras added on the dayA written quotation after a site visit, and nothing added on the day
TeamCrews supplied through agencies or subcontractorsCrew directly employed by The MELLS, with a named supervisor
MethodParts replaced until the fault goes awayThe fault is found, measured and explained before any part is replaced
HandoverThe job ends when the crew leavesA measured test for every job, with photographs before and after
AftercareA return visit is chargedA failed check is put right free of charge within 48 hours

Our commitments on every onyx stone cleaning job

The same standard on a single room or a whole estate.

Onyx Stone Cleaning in Al Maqtaa: what we plan for

Al Maqtaa and Bain Al Jessrain take their name from the stretch of mainland between the Maqta and Mussafah bridges, along Khor Al Maqta. Qaryat Al Beri holds the Shangri La Residences and The Souk, while the streets behind are lined with large private villas of four to seven bedrooms, many near embassies and government offices, alongside gated compounds such as Urban Oasis.

The creek and the mangroves keep humidity high along the shore, and waterfront homes see mineral spotting on glass and corrosion on metal railings. Further inland the villas collect sand from open plots, and the hard water scales heaters and shower glass. Large villas run several AC systems, pumps and tanks. Each is logged on the first visit, and waterfront units are checked for corrosion at every service.

Shangri La Residences need clearance through building management, with lift and loading bay times agreed. Private villas are reached directly, and compounds register the crew at the gate. Any outside work that needs consent is identified at the site visit.

What your quotation depends on

A quotation for onyx stone cleaning in Al Maqtaa follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.

Related Marble Polishing & Restoration services in Al Maqtaa

Each one has its own scope and method.

Onyx Stone Cleaning across Al Maqtaa

Questions about onyx stone cleaning in Al Maqtaa

What does onyx stone cleaning include?

Onyx is soft, often backlit and easily etched by acids. We clean it with pH neutral products and soft pads, and treat dull or etched areas by hand after testing. The work includes surface checked for etching, scratches, resin fills and backlighting; dust lifted and the stone washed with a pH neutral stone cleaner; light etch marks and dullness treated by hand after a small test.

Can etch marks on onyx be removed?

Light etching usually responds to hand polishing with a fine compound. Deeper marks need more work, and on thin or backlit slabs we keep it gentle to avoid exposing the backing. We test a small area and show you the result before treating the rest.

What should I avoid using on an onyx vanity?

Anything acidic or abrasive: vinegar, lemon, limescale removers, bleach based bathroom sprays and scouring creams. Wipe spills quickly, especially perfume and cosmetics, and use a pH neutral cleaner made for stone for everyday cleaning.

How much does onyx stone cleaning cost in Al Maqtaa?

We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.

Who provides onyx stone cleaning in Al Maqtaa?

The MELLS provides onyx stone cleaning in Al Maqtaa, Abu Dhabi. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.

How long does onyx stone cleaning take?

Typically one to three days for most homes. The time for your property is confirmed with the quotation.

Can etch marks and stains be removed?

Etch marks are polished out. Most stains are drawn out with a poultice.

How long does marble polishing last?

One to three years in a home, depending on traffic and care. Sealing and pH neutral cleaning extend it.

Is polishing dusty?

No. Stone is polished wet, and slurry is vacuumed as we go.

How do your crews get access to Al Maqtaa?

Shangri La Residences need clearance through building management, with lift and loading bay times agreed. Private villas are reached directly, and compounds register the crew at the gate. Any outside work that needs consent is identified at the site visit.

Can you clean a large villa used for receptions?

Yes. Majlis rooms, dining halls and kitchens are planned around your events, and the crew size is set at the site visit so the work fits the time you have.

How do I choose a company for onyx stone cleaning in Al Maqtaa?

Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.

How are visits to Al Maqtaa arranged?

Visits in Abu Dhabi are booked by appointment between 08:00 and 19:00, Monday to Saturday. Call or send the form and we agree the earliest time a supervisor can come to you.

Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.

Other services in Al Maqtaa

Deep Cleaning in Al Maqtaa

AC & Duct Cleaning in Al Maqtaa

Painting Services in Al Maqtaa

Fit Out & Renovation in Al Maqtaa

Gypsum & False Ceiling Works in Al Maqtaa

Wallpaper Fixing in Al Maqtaa

Flooring & Tiling in Al Maqtaa

Carpenter Services in Al Maqtaa

Glass & Aluminium Works in Al Maqtaa

Waterproofing in Al Maqtaa

Interior Design & Styling in Al Maqtaa

Other communities

Onyx Stone Cleaning in Saadiyat Island

Onyx Stone Cleaning in Hidd Al Saadiyat

Onyx Stone Cleaning in Jubail Island

Onyx Stone Cleaning in Ramhan Island

Onyx Stone Cleaning in Fahid Island

Onyx Stone Cleaning in Hudayriyat Island

Onyx Stone Cleaning in Al Jurf

Onyx Stone Cleaning in Nurai Island

Onyx Stone Cleaning in Yas Island

Onyx Stone Cleaning in Al Reem Island

Onyx Stone Cleaning in Al Maryah Island

Onyx Stone Cleaning in Masdar City

Onyx Stone Cleaning in Al Raha Beach

Onyx Stone Cleaning in Al Raha Gardens

Onyx Stone Cleaning in Al Raha Golf Gardens

Onyx Stone Cleaning in Khalifa City

Onyx Stone Cleaning in Al Forsan Village

Onyx Stone Cleaning in Sas Al Nakhl Village

Onyx Stone Cleaning in Bloom Gardens

Onyx Stone Cleaning in Al Bateen

Onyx Stone Cleaning in Al Khalidiyah

Onyx Stone Cleaning in Corniche Road

Onyx Stone Cleaning in Marina & Breakwater

Onyx Stone Cleaning in Al Mushrif

Onyx Stone Cleaning in Al Karamah

Onyx Stone Cleaning in Al Rawdah

Onyx Stone Cleaning in Embassies District

Onyx Stone Cleaning in Al Qurm

Onyx Stone Cleaning in every community

This community

Everything we do in Al Maqtaa

Who we do this for

Marble Polishing & Restoration for private residences

Marble Polishing & Restoration for hotels, restaurants and wellness venues

Marble Polishing & Restoration for boutiques and retail units

Marble Polishing & Restoration for offices and corporate premises

Marble Polishing & Restoration for restaurants, cafes and commercial kitchens

Guides

Marble floors: what must never be used to clean them

Marble polishing or crystallisation?

Deep cleaning a mansion in Emirates Hills: how it is planned

District One villas: lagoon air, glass and stone care

Choosing flooring for a Dubai home: the options compared

Book a site visit. We look at the work and send a written quotation.