Fit Out & Renovation
Shell and Core Fit Out in Dubai Investment Park & Green Community
The MELLS provides shell and core fit out in Dubai Investment Park with its own directly employed team. From bare slab, block walls and capped services to a working space: raised or screeded floors, partitions, ceilings, power, lighting, AC distribution and finishes. Book a site visit and you receive a written quotation before any work begins.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday

Shell and Core Fit Out at a glance
| Service | Shell and Core Fit Out |
|---|---|
| Location | Dubai Investment Park & Green Community |
| Property types | Villas and apartments |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | Agreed at the site visit and planned around your trading hours |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
A fit out company for villas, apartments, offices and shops, building ceilings, partitions, joinery, flooring and finishes with its own trades. Most fit out delays in Dubai come from permits, building access rules and trades waiting on each other. We identify the approvals your building, master developer or the authorities ask for at the site visit, prepare that paperwork, and run every trade under one supervisor to a written programme.
- Capped off services and the landlord tie in points recorded
- Setting out marked on the slab before any partition is fixed
- First fix electrics, plumbing and AC ducting, then ceilings closed
- Flooring, joinery, paint and second fix in that order
How we carry out shell and core fit out
A shell and core unit arrives with a concrete slab, a capped chilled water or AC connection, a sprinkler main and an electrical board. The survey records each of those tie in points, and the drawings are built outward from them. The layout is marked on the slab in chalk line, partitions are framed, and the services are run through the open studs and across the soffit. Ceilings close only after the high level work has been inspected. Floors, joinery and decoration follow.
Order matters more here than on any other job. Close a ceiling before the sprinkler and AC work above it is inspected and it gets cut open again. Lay flooring before the wet trades finish and it is ruined. Landlords of new towers issue a fit out guide that sets out the drawings they want to see and the inspections they carry out along the way. The site visit establishes what that guide asks for, and the programme is written around its hold points.
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Talk to a supervisor about shell and core fit out today.
Why choose The MELLS for shell and core fit out
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Method | Parts replaced until the fault goes away | The fault is found, measured and explained before any part is replaced |
| Handover | The job ends when the crew leaves | A measured test for every job, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every shell and core fit out job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
A measured test for every job, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
Shell and Core Fit Out in Dubai Investment Park: what we plan for
Dubai Investment Park is a mixed use district in two phases. Much of it is working land: warehouses, factories, showrooms, offices and staff accommodation. Inside it sits Green Community, a planted residential quarter of villas, bungalows, townhouses and low rise apartment buildings around lakes and lawns, in West, East and Village sections. Dunes Village, Ritaj, Centurion Residences and Ewan Residences are apartment communities in the wider park, and Schon Business Park is an office and retail address.
Two environments sit side by side. In Green Community the dense planting and daily irrigation mean leaf litter, pollen, insects and overspray marks on glass and walls. Along the industrial roads, lorries and open yards raise a heavy dust that settles on facades, car parks and rooftop AC units. Villas here have several AC zones and older ductwork, so a service takes in the grilles, filters, coils and drain lines of every zone. Rooftop and yard units near the industrial roads have their condenser fins washed more often.
Green Community is a managed estate, and the resident tells security about the crew before the visit. The apartment communities issue their own contractor permits, and The MELLS applies for them. Warehouses and factories set their own site rules, confirmed at the site visit.
What your quotation depends on
A quotation for shell and core fit out in Dubai Investment Park follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related Fit Out & Renovation services in Dubai Investment Park
Each one has its own scope and method.
Office Fit Out
Villa Renovation
Apartment Renovation
Kitchen Renovation
Bathroom Renovation
Retail Fit Out
Restaurant Fit Out
Joinery
Flooring Installation
Turnkey Fit Out
Clinic Fit Out
Salon and Spa Fit Out
Gym and Studio Fit Out
Cafe and Coffee Shop Fit Out
Showroom Fit Out
Nursery and Learning Centre Fit Out
Office Renovation and Refurbishment
Office Reinstatement and Make Good
Fit Out Design and Space Planning
Fit Out Approvals and Permits
Fit Out Snagging and Handover
Penthouse Renovation
Townhouse Renovation
Bedroom Renovation
Living Room Renovation
Majlis Fit Out
Home Office Fit Out
Home Cinema Room Fit Out
Fitted Wardrobes and Walk in Closets
Custom Kitchen Cabinets
TV Wall and Media Units
Wall Panelling and Cladding
Staircase and Balustrade Works
Reception Desk and Feature Wall
Shell and Core Fit Out across Dubai Investment Park
Questions about shell and core fit out in Dubai Investment Park
What does shell and core fit out include?
From bare slab, block walls and capped services to a working space: raised or screeded floors, partitions, ceilings, power, lighting, AC distribution and finishes. The work includes capped off services and the landlord tie in points recorded; setting out marked on the slab before any partition is fixed; first fix electrics, plumbing and AC ducting, then ceilings closed.
What does shell and core actually include?
It varies by building, but usually a bare slab, external walls and glazing, and services brought to the edge of the unit and capped. Floors, ceilings, internal walls, lighting and AC distribution are the tenant fit out. We list exactly what is there at the survey.
Who deals with the landlord during a shell and core fit out?
The MELLS prepares the drawings and forms the landlord asks for, books the inspections and attends them with the foreman. You stay informed through one point of contact and sign off the layout and finishes before they are submitted.
How much does shell and core fit out cost in Dubai Investment Park?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides shell and core fit out in Dubai Investment Park?
The MELLS provides shell and core fit out in Dubai Investment Park. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does shell and core fit out take?
Typically agreed at the site visit and planned around your trading hours. The time for your property is confirmed with the quotation.
Do you carry out fit out and renovation work in Dubai Investment Park?
Yes. Our own trades work across Dubai, and the site visit confirms the access rules, working hours and approvals that apply to your building or community.
Do I need a permit to renovate my home or office?
Often, yes. Buildings, master developers and in some cases the authorities ask for approval before fit out work starts. We identify what applies at the site visit and prepare the paperwork they ask for.
Can you build from drawings prepared by our designer?
Yes. We build from your designer's drawings and specifications, and raise any buildability questions before the quotation is issued.
How do your crews get access to Dubai Investment Park?
Green Community is a managed estate, and the resident tells security about the crew before the visit. The apartment communities issue their own contractor permits, and The MELLS applies for them. Warehouses and factories set their own site rules, confirmed at the site visit.
Do you take on warehouses and factories in Dubai Investment Park?
Yes. The site is surveyed first, with the safety rules, the floor type and the working pattern noted. A written quotation then sets out the areas, the method and the days, and the job is phased so the premises keep working.
How do I choose a company for shell and core fit out in Dubai Investment Park?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
Can you come to Dubai Investment Park at short notice?
Yes. Crews travel from our Barsha Heights base, and urgent work in Dubai is attended within two hours between 08:00 and 19:00, Monday to Saturday.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.
