Fit Out & Renovation
Shell and Core Fit Out in Al Furjan, Discovery Gardens & Jebel Ali Village
Shell and Core Fit Out in Al Furjan by The MELLS. From bare slab, block walls and capped services to a working space: raised or screeded floors, partitions, ceilings, power, lighting, AC distribution and finishes. A supervisor visits first, and the written quotation follows before any work begins.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday

Shell and Core Fit Out at a glance
| Service | Shell and Core Fit Out |
|---|---|
| Location | Al Furjan, Discovery Gardens & Jebel Ali Village, Dubai |
| Property types | Villas and apartments |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | Agreed at the site visit and planned around your trading hours |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
A fit out company for villas, apartments, offices and shops, building ceilings, partitions, joinery, flooring and finishes with its own trades. Most fit out delays in Dubai come from permits, building access rules and trades waiting on each other. We identify the approvals your building, master developer or the authorities ask for at the site visit, prepare that paperwork, and run every trade under one supervisor to a written programme.
- Capped off services and the landlord tie in points recorded
- Setting out marked on the slab before any partition is fixed
- First fix electrics, plumbing and AC ducting, then ceilings closed
- Flooring, joinery, paint and second fix in that order
How we carry out shell and core fit out
A shell and core unit arrives with a concrete slab, a capped chilled water or AC connection, a sprinkler main and an electrical board. The survey records each of those tie in points, and the drawings are built outward from them. The layout is marked on the slab in chalk line, partitions are framed, and the services are run through the open studs and across the soffit. Ceilings close only after the high level work has been inspected. Floors, joinery and decoration follow.
Order matters more here than on any other job. Close a ceiling before the sprinkler and AC work above it is inspected and it gets cut open again. Lay flooring before the wet trades finish and it is ruined. Landlords of new towers issue a fit out guide that sets out the drawings they want to see and the inspections they carry out along the way. The site visit establishes what that guide asks for, and the programme is written around its hold points.
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Talk to a supervisor about shell and core fit out today.
Why choose The MELLS for shell and core fit out
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Method | Parts replaced until the fault goes away | The fault is found, measured and explained before any part is replaced |
| Handover | The job ends when the crew leaves | A measured test for every job, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every shell and core fit out job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
A measured test for every job, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
Shell and Core Fit Out in Al Furjan: what we plan for
Al Furjan is a newer community of villas and townhouses, among them Quortaj and the Dubai Style Villas, with a growing band of apartment buildings such as Masakin Al Furjan, Murano Residences and the Azizi and Candace blocks. Discovery Gardens next door is older and lower: garden apartment buildings grouped into themed clusters, including Zen, Mogul, Mediterranean and Cactus. The Gardens is a similar low rise apartment quarter, and Jebel Ali Village is a villa district.
Apartment plots are still being built across Al Furjan, so cement dust settles on balconies and in AC filters. In Discovery Gardens the cause is different. Mature trees and daily irrigation bring leaf litter, insects and damp shade to the lower floors, and older window seals let fine dust through. AC units in the older apartments often have blocked drain lines that stain the ceiling below. The line is flushed, the tray cleaned and the coil washed. Villa systems in Al Furjan are serviced zone by zone in one visit.
Villa streets in Al Furjan have parking outside the house. Apartment buildings ask for a work permit and a service lift booking, which The MELLS arranges. In Discovery Gardens the blocks are low and the lifts small, so compact equipment is sent.
What your quotation depends on
A quotation for shell and core fit out in Al Furjan follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related Fit Out & Renovation services in Al Furjan
Each one has its own scope and method.
Office Fit Out
Villa Renovation
Apartment Renovation
Kitchen Renovation
Bathroom Renovation
Retail Fit Out
Restaurant Fit Out
Joinery
Flooring Installation
Turnkey Fit Out
Clinic Fit Out
Salon and Spa Fit Out
Gym and Studio Fit Out
Cafe and Coffee Shop Fit Out
Showroom Fit Out
Nursery and Learning Centre Fit Out
Office Renovation and Refurbishment
Office Reinstatement and Make Good
Fit Out Design and Space Planning
Fit Out Approvals and Permits
Fit Out Snagging and Handover
Penthouse Renovation
Townhouse Renovation
Bedroom Renovation
Living Room Renovation
Majlis Fit Out
Home Office Fit Out
Home Cinema Room Fit Out
Fitted Wardrobes and Walk in Closets
Custom Kitchen Cabinets
TV Wall and Media Units
Wall Panelling and Cladding
Staircase and Balustrade Works
Reception Desk and Feature Wall
Questions about shell and core fit out in Al Furjan
What does shell and core fit out include?
From bare slab, block walls and capped services to a working space: raised or screeded floors, partitions, ceilings, power, lighting, AC distribution and finishes. The work includes capped off services and the landlord tie in points recorded; setting out marked on the slab before any partition is fixed; first fix electrics, plumbing and AC ducting, then ceilings closed.
What does shell and core actually include?
It varies by building, but usually a bare slab, external walls and glazing, and services brought to the edge of the unit and capped. Floors, ceilings, internal walls, lighting and AC distribution are the tenant fit out. We list exactly what is there at the survey.
Who deals with the landlord during a shell and core fit out?
The MELLS prepares the drawings and forms the landlord asks for, books the inspections and attends them with the foreman. You stay informed through one point of contact and sign off the layout and finishes before they are submitted.
How much does shell and core fit out cost in Al Furjan?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides shell and core fit out in Al Furjan?
The MELLS provides shell and core fit out in Al Furjan, Dubai. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does shell and core fit out take?
Typically agreed at the site visit and planned around your trading hours. The time for your property is confirmed with the quotation.
Can you build from drawings prepared by our designer?
Yes. We build from your designer's drawings and specifications, and raise any buildability questions before the quotation is issued.
Do you take on structural work or extensions?
No. We do not take on structural alterations, extensions or any work that needs an engineer's stamp. Our scope is interior fit out, finishes and the services inside the existing structure.
Can we stay in the property during the renovation?
For a single room or one bathroom, usually yes, with the work area sealed off and cleaned down each day. For a whole home renovation we recommend moving out until handover.
How do your crews get access to Al Furjan?
Villa streets in Al Furjan have parking outside the house. Apartment buildings ask for a work permit and a service lift booking, which The MELLS arranges. In Discovery Gardens the blocks are low and the lifts small, so compact equipment is sent.
Do you cover Discovery Gardens and The Gardens as well as Al Furjan?
Yes. Apartment teams work in the Discovery Gardens clusters and The Gardens, and villa crews in Al Furjan and Jebel Ali Village. Give the cluster and building number when you book so that the crew arrives at the right block.
How do I choose a company for shell and core fit out in Al Furjan?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
Can you come to Al Furjan at short notice?
Yes. Crews travel from our Barsha Heights base, and urgent work in Dubai is attended within two hours between 08:00 and 19:00, Monday to Saturday.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.
