Jumeirah Lakes Towers
Custom Joinery in Concorde Tower, Jumeirah Lakes Towers
The MELLS provides custom joinery in Concorde Tower, Jumeirah Lakes Towers with its own directly employed team. Made to measure pieces designed around the room, such as media walls, bookcases, vanity units, study desks and shop counters. Chosen when standard furniture will not fit. We visit the property first and confirm the scope in a written quotation.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday
Custom Joinery at a glance
| Service | Custom Joinery |
|---|---|
| Location | Concorde Tower, Jumeirah Lakes Towers, Dubai |
| Property types | Apartments |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | 1 to 4 hours for most repairs, with made to measure joinery quoted per project, typically 1 to 3 weeks |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
Carpenter services for homes, offices and shops: door repairs, wardrobes, kitchen cabinets, custom joinery, wall panelling, pergolas and decking. Timber moves in Dubai. Doors swell in the humid months and shrink under constant AC, hinges pull out of board carcasses, and sun and irrigation water bleach and split outdoor wood. Our carpenters repair what can be repaired, make new pieces to measure and match veneers and finishes as closely as the material allows.
- Site measure and drawings for your approval
- Materials, finishes and hardware agreed in writing
- Made and installed by our own carpenters
- Scribed to walls and floors for a built in finish
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Talk to a supervisor about custom joinery today.
Why choose The MELLS for custom joinery
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Method | Parts replaced until the fault goes away | The fault is found, measured and explained before any part is replaced |
| Handover | The job ends when the crew leaves | A measured test for every job, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every custom joinery job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
A measured test for every job, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
Custom Joinery in Concorde Tower, Jumeirah Lakes Towers: what we plan for
This is one of the towers of Jumeirah Lakes Towers, set in a cluster beside the lakes, with apartments above a podium of shops and parking. Tower rules on permits, service lifts and working hours apply even to a short visit, and we arrange all three.
Many towers here are cooled by chilled water, with fan coil units above the ceiling. Filters, coils, drain trays and drain lines are cleaned in place, and anything on the building side of the valve is raised with the tower management.
JLT is a free zone and every tower has its own management office. A work permit, staff details and a service lift booking are asked for almost everywhere, and The MELLS arranges them. The van unloads at the service entrance in the slot the tower gives.
What your quotation depends on
A quotation for custom joinery in Concorde Tower, Jumeirah Lakes Towers follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related Carpenter Services services in Concorde Tower, Jumeirah Lakes Towers
Each one has its own scope and method.
Nearby in Jumeirah Lakes Towers
Questions about custom joinery in Concorde Tower, Jumeirah Lakes Towers
What does custom joinery include?
Made to measure pieces designed around the room, such as media walls, bookcases, vanity units, study desks and shop counters. Chosen when standard furniture will not fit. The work includes site measure and drawings for your approval; materials, finishes and hardware agreed in writing; made and installed by our own carpenters.
How much does custom joinery cost in Concorde Tower, Jumeirah Lakes Towers?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides custom joinery in Concorde Tower, Jumeirah Lakes Towers?
The MELLS provides custom joinery in Concorde Tower, Jumeirah Lakes Towers, Dubai. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does custom joinery take?
Typically 1 to 4 hours for most repairs, with made to measure joinery quoted per project, typically 1 to 3 weeks. The time for your property is confirmed with the quotation.
Why do my doors stick in summer?
Timber takes in moisture when the air is humid and gives it up when the AC runs for long hours, so it swells and shrinks through the year. Sealing every face of the door, including the top and bottom edges, reduces the movement.
Do you make fitted wardrobes and custom joinery?
We do. We measure on site, agree drawings, materials and hardware with you, then make and install the piece. The programme is stated in the quotation.
Does a pergola or deck need approval?
It may, depending on the community and on the size and position of the structure. This is identified at the site visit, and we prepare the paperwork the community or master developer asks for.
Do you arrange the building permit in Concorde Tower, Jumeirah Lakes Towers?
Yes. Most buildings ask contractors for a work permit, trade licence, insurance and staff IDs, and a service lift booking. We submit all of it for you.
How do you get equipment up to a high floor?
Through the service lift, booked in advance with the tower. Machines are chosen to fit it, the corridor floor is covered, and the booking slot sets the start time we give you.
How do I choose a company for custom joinery in Concorde Tower, Jumeirah Lakes Towers?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
Can you come to Concorde Tower, Jumeirah Lakes Towers at short notice?
Yes. Crews travel from our Barsha Heights base, and urgent work in Dubai is attended within two hours between 08:00 and 19:00, Monday to Saturday.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.