Dubai Silicon Oasis
Mould Inspection and Testing in Silicon Gates, Dubai Silicon Oasis
Mould Inspection and Testing in Silicon Gates, Dubai Silicon Oasis by The MELLS. A survey that maps where the mould is, how damp the structure is and what is feeding it, with moisture and humidity readings set out in a written report. Book a site visit and you receive a written quotation before any work begins.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday

Mould Inspection and Testing at a glance
| Service | Mould Inspection and Testing |
|---|---|
| Location | Silicon Gates, Dubai Silicon Oasis |
| Property types | Apartments |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | Half a day for a single room, and 1 to 3 days where plaster or paint has to dry between stages |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | 14 Point Standard signed by the supervisor, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 58 656 3001 or email contact@themells.ae |
What is included
Mould removal for villas and apartments that begins by finding the moisture source, then removes the growth and treats the surface behind it. Humid Dubai air meets cold air conditioned walls, ducts and wardrobes, and the condensation feeds mould within weeks, most of all in homes closed up over summer. Mould returns if the moisture remains, so we trace the leak, condensation or ventilation fault first, contain the area, remove the growth and tell you plainly what must be repaired to keep it away.
- Room by room visual check, including behind furniture and inside AC grilles
- Moisture meter readings on walls, ceilings, skirting and joinery
- Air temperature and relative humidity logged in each room
- Laboratory sampling arranged with an outside laboratory on request
How we carry out mould inspection and testing
An inspection answers three questions: where the mould is, how wet the building fabric is, and where that moisture comes from. The supervisor walks every room with a torch and a moisture meter, moves furniture off external walls, opens wardrobes and looks behind AC grilles and access hatches. Readings are taken on walls, ceilings and skirting and marked on a plan. Air temperature and relative humidity are logged room by room, since a home held at high humidity will grow mould on walls that have no leak at all.
The report sets out each affected area with photographs, the readings, the likely cause and the repair that would stop it. It does not name the species, because nobody can do that by eye. Where a tenant, a landlord or a doctor needs to know exactly what is growing, The MELLS arranges surface or air sampling with an outside laboratory and passes on the result as issued. We do not run a laboratory ourselves. Most homes do not need sampling to be treated properly, and we say so when that is the case.
How it works
The same method on every job, so the result does not depend on who is on shift.
- Site visit and written quotation. A supervisor visits, measures and records every room, surface and extra. The written quotation that follows sets out the scope, with no hourly meter and nothing added on the day.
- Protect and prepare. Lifts, floors and furniture are protected and delicate finishes are logged on a surface register before any product is opened.
- Dry before wet, top before bottom. Dust is lifted with HEPA filtered vacuums from ceilings and fittings downwards. Each zone is then wet cleaned with chemistry matched to its finish.
- Detail work and floors. Tracks, switches, skirtings, handles and glass are finished by hand. Floors are machine scrubbed last so nothing is walked back in.
- Inspection and report. The supervisor signs all fourteen checks, photographs the result and sends you the report within the hour.
Talk to a supervisor about mould inspection and testing today.
Why choose The MELLS for mould inspection and testing
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Products | One all purpose chemical on every surface | Products matched to marble, wood, brass, crystal and fabric |
| Handover | The job ends when the crew leaves | 14 Point Standard signed by the supervisor, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every mould inspection and testing job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
14 Point Standard signed by the supervisor, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
Mould Inspection and Testing in Silicon Gates, Dubai Silicon Oasis: what we plan for
This is one of the apartment buildings of Dubai Silicon Oasis, mid or high rise, where the crew needs a permit from the building and a booked service lift. In an apartment building we submit the work permit, book the service lift and bring compact equipment that fits it.
Sheikh Mohammed Bin Zayed Road and the Dubai Al Ain Road meet beside the community, so road facing glass and sills carry a traffic film. Open desert begins just beyond Academic City, and in Liwan and Majan empty plots stand between finished blocks. Sand reaches balconies and AC filters from both.
Cedre Villas and Semmer Villas have gatehouses, and the resident registers the crew in advance. Apartment and office buildings issue a contractor permit and a service lift slot on request, and The MELLS makes that request. Campus and free zone rules are confirmed at the site visit.
What your quotation depends on
A quotation for mould inspection and testing in Silicon Gates, Dubai Silicon Oasis follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size of the property and number of rooms
- Condition, and how long since the last deep clean
- Furnished and occupied, or empty
- Extras such as sofas, carpets, mattresses, external glass or outdoor areas
Related Mould Removal & Remediation services in Silicon Gates, Dubai Silicon Oasis
Each one has its own scope and method.
Bathroom Mould Removal
Ceiling Mould Treatment
Wall Mould Treatment
Wardrobe Mould Removal
Anti Mould Coating
Mould Repair After a Leak
Black Mould Removal
White Mould Removal
Green Mould Removal
Pink Mould and Shower Slime Removal
Mildew Removal
Bedroom Mould Removal
Kitchen Mould Removal
Window Frame and Sealant Mould Removal
Musty Smell and Damp Odour Removal
Villa Mould Removal
Apartment Mould Removal
Mould Removal After Flooding
Mould Treatment for a Home Closed Over Summer
Yellow Mould Removal
Mould Treatment for New Homes Before Handover
Office and Commercial Mould Removal
Pre Tenancy Mould Check
Mould Prevention Visits
AC Mould Removal
Curtain Mould and Odour Removal
Damp Wall Treatment
Nearby in Dubai Silicon Oasis
Questions about mould inspection and testing in Silicon Gates, Dubai Silicon Oasis
What does mould inspection and testing include?
A survey that maps where the mould is, how damp the structure is and what is feeding it, with moisture and humidity readings set out in a written report. The work includes room by room visual check, including behind furniture and inside AC grilles; moisture meter readings on walls, ceilings, skirting and joinery; air temperature and relative humidity logged in each room.
Do I need laboratory testing before the mould is removed?
Usually not. Visible mould is removed the same careful way whatever the species, and the fix is always the moisture. Sampling is worth having when there is a dispute, a health question raised by a doctor or a smell with nothing visible.
Who writes the laboratory result?
The outside laboratory does. We arrange the sampling and send you their document unchanged, alongside our own survey report with readings and photographs. The MELLS does not issue laboratory results or certificates of its own.
How much does mould inspection and testing cost in Silicon Gates, Dubai Silicon Oasis?
We do not publish prices, because no two jobs are the same. The main factors: size of the property and number of rooms; condition, and how long since the last deep clean. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides mould inspection and testing in Silicon Gates, Dubai Silicon Oasis?
The MELLS provides mould inspection and testing in Silicon Gates, Dubai Silicon Oasis. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 58 656 3001.
How long does mould inspection and testing take?
Typically half a day for a single room, and 1 to 3 days where plaster or paint has to dry between stages. The time for your property is confirmed with the quotation.
Do we have to move out while the mould is treated?
Rarely. The affected room is sealed off while we work and handed back once it has been dried and aired.
Do you carry out mould removal in Silicon Gates, Dubai Silicon Oasis?
Yes, across Dubai. Book a site visit and a supervisor inspects the affected rooms and takes moisture readings before any treatment is proposed.
Will the mould come back after treatment?
It will if the moisture that fed it is still there. That is why we find the leak, condensation or ventilation fault first and put in writing what needs fixing.
Do you arrange the building permit in Silicon Gates, Dubai Silicon Oasis?
Yes. Most buildings ask contractors for a work permit, trade licence, insurance and staff IDs, and a service lift booking. We submit all of it for you.
Do you cover Academic City, Liwan and Majan?
Yes. Student housing, campus buildings and the apartment blocks of Liwan and Majan are all covered. Tell us the building name when you call, because access rules differ from one landlord to the next.
How do I choose a company for mould inspection and testing in Silicon Gates, Dubai Silicon Oasis?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (14 Point Standard signed by the supervisor, with photographs before and after) and puts right any failed check free of charge within 48 hours.
Can you come to Silicon Gates, Dubai Silicon Oasis at short notice?
Yes. Crews travel from our Barsha Heights base, and urgent work in Dubai is attended within two hours between 08:00 and 19:00, Monday to Saturday.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.
