Mould Removal & Remediation
Window Frame and Sealant Mould Removal in DAMAC Islands
The MELLS provides window frame and sealant mould removal in DAMAC Islands with its own directly employed team. Condensation on aluminium frames and glass leaves black sealant around windows, baths and shower trays. Stained sealant is cut out and renewed, not just wiped. Book a site visit and you receive a written quotation before any work begins.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday

Window Frame and Sealant Mould Removal at a glance
| Service | Window Frame and Sealant Mould Removal |
|---|---|
| Location | DAMAC Islands, Dubai |
| Property types | Townhouses and villas |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | Half a day for a single room, and 1 to 3 days where plaster or paint has to dry between stages |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | 14 Point Standard signed by the supervisor, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 58 656 3001 or email contact@themells.ae |
What is included
Mould removal for villas and apartments that begins by finding the moisture source, then removes the growth and treats the surface behind it. Humid Dubai air meets cold air conditioned walls, ducts and wardrobes, and the condensation feeds mould within weeks, most of all in homes closed up over summer. Mould returns if the moisture remains, so we trace the leak, condensation or ventilation fault first, contain the area, remove the growth and tell you plainly what must be repaired to keep it away.
- Frames, tracks, gaskets and reveals cleaned with antifungal solution
- Stained sealant cut out fully and the joint cleaned and dried
- New mould resistant sanitary silicone applied and tooled
- Drainage slots in window tracks cleared so water can escape
How we carry out window frame and sealant mould removal
Aluminium frames and glass are the coldest surfaces in an air conditioned room. In humid months the warm, wet air outside finds every gap, moisture condenses on the frame, and the water runs into the track and onto the sealant line. Dust settles on the wet bead and mould follows. The same thing happens around a bath or a shower tray, where the bead is splashed daily. We wash the frames, tracks and gaskets with an antifungal solution and clear the small drainage slots in the track so water has a way out.
Sealant that has turned black is replaced. Mould grows down into silicone and under its edges, so scrubbing only cleans the skin and the stain returns. The old bead is cut out with a blade, the residue is stripped, and the joint is cleaned, treated and left until it is dry; new silicone over a damp joint lets go within months. A fresh bead of sanitary silicone is then gunned in and tooled to shed water. Around a bath, the bath is filled first so the joint is sealed at its widest.
How it works
The same method on every job, so the result does not depend on who is on shift.
- Site visit and written quotation. A supervisor visits, measures and records every room, surface and extra. The written quotation that follows sets out the scope, with no hourly meter and nothing added on the day.
- Protect and prepare. Lifts, floors and furniture are protected and delicate finishes are logged on a surface register before any product is opened.
- Dry before wet, top before bottom. Dust is lifted with HEPA filtered vacuums from ceilings and fittings downwards. Each zone is then wet cleaned with chemistry matched to its finish.
- Detail work and floors. Tracks, switches, skirtings, handles and glass are finished by hand. Floors are machine scrubbed last so nothing is walked back in.
- Inspection and report. The supervisor signs all fourteen checks, photographs the result and sends you the report within the hour.
Talk to a supervisor about window frame and sealant mould removal today.
Why choose The MELLS for window frame and sealant mould removal
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Products | One all purpose chemical on every surface | Products matched to marble, wood, brass, crystal and fabric |
| Handover | The job ends when the crew leaves | 14 Point Standard signed by the supervisor, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every window frame and sealant mould removal job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
14 Point Standard signed by the supervisor, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
Window Frame and Sealant Mould Removal in DAMAC Islands: what we plan for
DAMAC Islands is a villa and townhouse community in Dubailand, reached from Emirates Road near DAMAC Lagoons and DAMAC Hills. Its clusters are named after islands, Maldives, Bora Bora, Seychelles, Hawaii, Bali and Fiji, with a second phase that includes Bahamas, Bermuda, Tahiti and Barbados, around lagoons, beaches and waterfalls, with the first handovers expected around 2028.
Lagoons and water features raise the humidity around the homes, and the inland location brings fine dust after windy days. New phases will be under construction for some time.
Clusters will be gated. Contractor visits are registered by the owner with community management.
What your quotation depends on
A quotation for window frame and sealant mould removal in DAMAC Islands follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size of the property and number of rooms
- Condition, and how long since the last deep clean
- Furnished and occupied, or empty
- Extras such as sofas, carpets, mattresses, external glass or outdoor areas
Related Mould Removal & Remediation services in DAMAC Islands
Each one has its own scope and method.
Bathroom Mould Removal
Ceiling Mould Treatment
Wall Mould Treatment
Wardrobe Mould Removal
Mould Inspection and Testing
Anti Mould Coating
Mould Repair After a Leak
Black Mould Removal
White Mould Removal
Green Mould Removal
Pink Mould and Shower Slime Removal
Mildew Removal
Bedroom Mould Removal
Kitchen Mould Removal
Musty Smell and Damp Odour Removal
Villa Mould Removal
Mould Removal After Flooding
Mould Treatment for a Home Closed Over Summer
Yellow Mould Removal
Mould Treatment for New Homes Before Handover
Office and Commercial Mould Removal
Pre Tenancy Mould Check
Mould Prevention Visits
AC Mould Removal
Curtain Mould and Odour Removal
Damp Wall Treatment
Window Frame and Sealant Mould Removal across DAMAC Islands
Questions about window frame and sealant mould removal in DAMAC Islands
What does window frame and sealant mould removal include?
Condensation on aluminium frames and glass leaves black sealant around windows, baths and shower trays. Stained sealant is cut out and renewed, not just wiped. The work includes frames, tracks, gaskets and reveals cleaned with antifungal solution; stained sealant cut out fully and the joint cleaned and dried; new mould resistant sanitary silicone applied and tooled.
Can the black sealant be cleaned instead of replaced?
Light surface spotting can be. Once the bead is stained through, the growth is inside the silicone and under its edge, and no cleaner reaches it. Cutting it out and resealing is quicker than repeated scrubbing and stays clean for far longer.
Why do my windows drip with water in summer?
The glass and frame are cooled by the AC while the air outside is hot and humid. Where that air leaks in, or where the room itself is humid, water condenses on the cold surface. Worn gaskets, blocked track drains and a very low thermostat setting all add to it.
How much does window frame and sealant mould removal cost in DAMAC Islands?
We do not publish prices, because no two jobs are the same. The main factors: size of the property and number of rooms; condition, and how long since the last deep clean. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides window frame and sealant mould removal in DAMAC Islands?
The MELLS provides window frame and sealant mould removal in DAMAC Islands, Dubai. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 58 656 3001.
How long does window frame and sealant mould removal take?
Typically half a day for a single room, and 1 to 3 days where plaster or paint has to dry between stages. The time for your property is confirmed with the quotation.
Why does mould grow in an air conditioned home?
Humid air condenses on cold surfaces, most often around AC grilles, ducts, external walls and closed wardrobes. Homes shut for the summer with the AC switched off are the most exposed.
Can I simply paint over mould?
No. Paint hides it for a few weeks while the growth carries on underneath. The surface has to be cleaned, treated and fully dry before a stain blocking primer goes on.
Do we have to move out while the mould is treated?
Rarely. The affected room is sealed off while we work and handed back once it has been dried and aired.
How do your crews get access to DAMAC Islands?
Clusters will be gated. Contractor visits are registered by the owner with community management.
Do you clean homes beside the lagoons?
Yes. Lagoon sand, water marks on glass and humidity in closed rooms are treated as part of the visit.
How do I choose a company for window frame and sealant mould removal in DAMAC Islands?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (14 Point Standard signed by the supervisor, with photographs before and after) and puts right any failed check free of charge within 48 hours.
Can you come to DAMAC Islands at short notice?
Yes. Crews travel from our Barsha Heights base, and urgent work in Dubai is attended within two hours between 08:00 and 19:00, Monday to Saturday.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.
