Marble Polishing & Restoration
Marble Honing to a Matt Finish in Al Raha Gardens
Smooth satin or matt honed finishes restored on modern marble and limestone floors. Scratches and etching come out with diamond pads, and no crystallisation shine is applied. The MELLS carries this out in Al Raha Gardens with its own directly employed team and a named supervisor. A supervisor visits first, and the written quotation follows before any work begins.
- Quotation
- Written, after a visit
- Response
- By appointment
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday

Marble Honing to a Matt Finish at a glance
| Service | Marble Honing to a Matt Finish |
|---|---|
| Location | Al Raha Gardens, Abu Dhabi |
| Property types | Villas |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | One to three days for most homes |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Visits in Abu Dhabi by appointment, Monday to Saturday |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
Grinding, honing, crystallisation and sealing for marble, travertine and terrazzo, gloss metered to 85 GU. Marble dulls because the surface is scratched and etched, not because it is dirty. We restore the stone with diamond abrasives, bring back the shine and seal it against the next spill.
- Furniture moved and skirting and joinery protected with tape and sheet
- Wet honing with diamond pads in stepped grits to the agreed finish
- Slurry lifted with a wet vacuum after each pass
- Penetrating sealer applied once the stone has dried
How we carry out marble honing to a matt finish
Many newer villas and apartments use marble or limestone with a honed finish: smooth to the touch, soft in the light and without the mirror shine of older homes. That finish shows wear differently. Traffic lanes go patchy, sand scratches the surface near the doors, and lemon juice or a harsh cleaning product leaves dull etch rings. Crystallisation, the usual polishing method, would put back a hard gloss, which is the wrong answer here. The supervisor agrees the target finish on a test area first.
Honing is done wet with diamond pads under a rotary machine, starting at a coarser grit to take out scratches and etching, then stepping finer until the floor matches the agreed satin or matt look. Slurry is lifted with a wet vacuum after each pass so it does not dry into the joints, and the rooms next door are protected from splashes. Once the stone has dried, a penetrating sealer goes on to slow staining. Deep chips and cracks are filled separately and noted on the job record.
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Talk to a supervisor about marble honing to a matt finish today.
Why choose The MELLS for marble honing to a matt finish
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Method | Parts replaced until the fault goes away | The fault is found, measured and explained before any part is replaced |
| Handover | The job ends when the crew leaves | A measured test for every job, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every marble honing to a matt finish job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
A measured test for every job, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
Marble Honing to a Matt Finish in Al Raha Gardens: what we plan for
Al Raha Gardens is a gated villa community opposite Al Raha Beach, divided into eleven neighbourhoods such as Sidra, Yasmina, Khannour, Samra, Lehweih and Al Tharwaniyah. Homes are family villas and townhouses of three to six bedrooms, most with a private garden, a maid's room and parking at the front. The first houses were handed over around 2009, so many have now been through several tenancies.
The community sits beside a main highway and open land, so fine sand reaches window tracks, roof tops and AC filters after any windy day. Garden irrigation keeps the ground damp along boundary walls, and the hard desalinated water leaves limescale on taps, shower glass and heater elements. Original AC units and water heaters are now reaching the end of their working life. We test each one, report its condition and plan repairs or replacement in a written scope.
Each neighbourhood is gated, and the resident registers our crew and vehicle with security before the visit. Exterior changes may need the consent of the master community. That is confirmed at the site visit, and we prepare the paperwork requested.
What your quotation depends on
A quotation for marble honing to a matt finish in Al Raha Gardens follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related Marble Polishing & Restoration services in Al Raha Gardens
Each one has its own scope and method.
Marble Honing to a Matt Finish across Al Raha Gardens
Questions about marble honing to a matt finish in Al Raha Gardens
What does marble honing to a matt finish include?
Smooth satin or matt honed finishes restored on modern marble and limestone floors. Scratches and etching come out with diamond pads, and no crystallisation shine is applied. The work includes furniture moved and skirting and joinery protected with tape and sheet; wet honing with diamond pads in stepped grits to the agreed finish; slurry lifted with a wet vacuum after each pass.
Can a polished marble floor be changed to a honed finish?
It can, by honing it down past the polish with diamond pads to the satin or matt level you choose. A test area is done first so you can see it. A honed floor shows less wear but takes stains more readily, so sealing matters.
Why not use crystallisation on a honed floor?
Crystallisation works by a chemical reaction that leaves a hard shine on the surface. On a floor chosen for a matt look, that gloss changes the character of the stone, and on limestone it can leave a patchy result. Diamond honing keeps the finish true.
How much does marble honing to a matt finish cost in Al Raha Gardens?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides marble honing to a matt finish in Al Raha Gardens?
The MELLS provides marble honing to a matt finish in Al Raha Gardens, Abu Dhabi. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does marble honing to a matt finish take?
Typically one to three days for most homes. The time for your property is confirmed with the quotation.
Can etch marks and stains be removed?
Etch marks are polished out. Most stains are drawn out with a poultice.
How long does marble polishing last?
One to three years in a home, depending on traffic and care. Sealing and pH neutral cleaning extend it.
Is polishing dusty?
No. Stone is polished wet, and slurry is vacuumed as we go.
How do your crews get access to Al Raha Gardens?
Each neighbourhood is gated, and the resident registers our crew and vehicle with security before the visit. Exterior changes may need the consent of the master community. That is confirmed at the site visit, and we prepare the paperwork requested.
Do we need Aldar approval for work in Al Raha Gardens?
Cleaning, AC servicing and repairs inside the home only need the gate or building pass, which the resident arranges. Exterior painting, waterproofing, fit out and any change to the facade, roof or garden structures need a no objection certificate from Aldar or the community management in Al Raha Gardens before work starts. We prepare the method statement, drawings, insurance and trade licence documents the approval asks for.
How do I choose a company for marble honing to a matt finish in Al Raha Gardens?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
How are visits to Al Raha Gardens arranged?
Visits in Abu Dhabi are booked by appointment between 08:00 and 19:00, Monday to Saturday. Call or send the form and we agree the earliest time a supervisor can come to you.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.
