Pendant Light Installation in The Cedars, Yas Island

Pendants and chandeliers hang from a fixing into the slab or a joist that is rated for their weight, with the drop set over the table, island or stairwell. The work includes weight of the fitting compared with the fixing to be used; anchor set into the slab or a joist, never gypsum board alone; drop height agreed on site before the cable is cut.

Low enough to light the table without glare, and high enough that nobody looks through it at the person opposite. We hold the fitting at a few heights while you sit at the table, then fix the drop.

We can. A tower scaffold goes up, the fixing is set into the slab and the chandelier is assembled in place. For very heavy pieces a winch can be fitted above the ceiling so the fitting lowers for cleaning.

We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.

The MELLS provides pendant light installation in The Cedars, Yas Island, Abu Dhabi. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.

Typically 1 to 3 hours for a few fittings, longer for whole rooms. The time for your property is confirmed with the quotation.

Four causes account for most flicker: a failing driver, a dimmer that does not suit the lamp, a loose neutral, or a transformer carrying more than it should. We test for them in turn instead of swapping lamps at random, and show you what we found.

Not from the board itself. The weight has to go to the slab or a joist through a fixing rated for the load, with the gypsum only covering it. We open a small access above the position, set the anchor and close the ceiling around the rose.

Towers and malls normally ask for a work permit, and a retail unit has to follow the landlord fit out guide. We identify what applies at the site visit and prepare the paperwork the building or the landlord asks for.

Each villa community has a gate where the resident registers our crew before the visit. Apartment buildings need a work permit and a service lift booking from management. Any exterior change needs the master community's approval; this is identified at the site visit and we prepare the paperwork.

Cleaning, AC servicing and repairs inside the home only need the gate or building pass, which the resident arranges. Exterior painting, waterproofing, fit out and any change to the facade, roof or garden structures need a no objection certificate from Aldar or the community management in Yas Island before work starts. We prepare the method statement, drawings, insurance and trade licence documents the approval asks for.

Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.

Visits in Abu Dhabi are booked by appointment between 08:00 and 19:00, Monday to Saturday. Call or send the form and we agree the earliest time a supervisor can come to you.