Al Barsha
Warehouse High Bay Lighting in Arjan, Dubai
The MELLS provides warehouse high bay lighting in Arjan, Dubai with its own directly employed team. High bay LED fittings are hung from the roof steel on chains or brackets, aimed down the aisles, and reached with a scissor lift or boom under a work plan. We visit the property first and confirm the scope in a written quotation.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday
Warehouse High Bay Lighting at a glance
| Service | Warehouse High Bay Lighting |
|---|---|
| Location | Arjan, Dubai |
| Premises | Offices, shops, clinics and other business premises |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | Agreed at the site visit and planned around your trading hours |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
Light fixing and lighting installation for homes, offices and shops, from one replaced fitting to downlights, LED strip, pendants and outdoor lights. Most lighting faults in Dubai trace back to a fitting screwed into gypsum board alone, a driver with no headroom, or a joint that humidity has reached. Our own technicians isolate the circuit at the distribution board, prove it dead with a tester and work to the manufacturer's instructions. Any approval the building or the community asks for is identified at the site visit, and we prepare the paperwork.
- Mounting height and racking layout measured before fittings are chosen
- Beam angle matched to the width and height of each aisle
- Fittings hung from purlins or trusses with a secondary safety wire
- Access equipment, exclusion zone and stock protection planned
How we carry out warehouse high bay lighting
Mounting height and racking decide the fitting. Narrow aisles between tall racks take a long, narrow beam, and open floor takes a wide one. Each high bay hangs from the roof steel on a chain or bracket with a secondary safety wire, fed from trunking or cable tray along the purlins. A scissor lift or boom gives access, with the aisle below closed off and stock sheeted. Sensors can dim or switch aisles that nobody is working in. Light levels are read at floor level with a meter once a bay is complete.
Under a metal roof in a Dubai summer the air at high level is far hotter than at the floor, and that is where the drivers sit. Fittings not rated for that temperature lose output and fail early, so the rating is compared with the roof conditions. Dust on lenses cuts the light year by year. Old metal halide lamps take minutes to warm up, which is why they were left on all day. The site visit measures heights, checks the steel and the supply, and plans access around operations.
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Talk to a supervisor about warehouse high bay lighting today.
Why choose The MELLS for warehouse high bay lighting
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Method | Parts replaced until the fault goes away | The fault is found, measured and explained before any part is replaced |
| Handover | The job ends when the crew leaves | A measured test for every job, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every warehouse high bay lighting job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
A measured test for every job, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
Warehouse High Bay Lighting in Arjan: what we plan for
This part of Al Barsha is made up of apartment and office towers, with access arranged through building management. In an apartment building we submit the work permit, book the service lift and bring compact equipment that fits it.
Our technicians are based minutes away, so urgent AC and maintenance calls in Al Barsha are usually attended well inside the two hour window.
Villas are on open streets. Towers in Barsha Heights and Al Barsha 1 need a work permit and a service lift booking, which we arrange.
What your quotation depends on
A quotation for warehouse high bay lighting in Arjan, Dubai follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related Lights Fixing & Lighting Installation services in Arjan
Each one has its own scope and method.
Light Fixing and Replacement
Spotlight and Downlight Installation
LED Strip and Cove Lighting
Pendant Light Installation
Wall Light Installation
Track Lighting Installation
Kitchen and Cabinet Lighting
Bathroom and Mirror Lighting
Staircase Lighting
Villa Exterior and Facade Lighting
LED Lighting Upgrade
Flickering and Faulty Light Repair
LED Driver and Transformer Replacement
Dimmer and Smart Switch Installation
Motion Sensor Lighting
Ramadan and Festive Lighting Installation
Villa Lighting Installation
Apartment Lighting Installation
Office Lighting Installation
Shop and Boutique Lighting
Restaurant and Cafe Lighting
Emergency and Exit Lighting
Chandelier Installation
Ceiling Fan Installation
Garden and Outdoor Lighting
Cove and Bulkhead Ceilings
Nearby in Al Barsha
Questions about warehouse high bay lighting in Arjan
What does warehouse high bay lighting include?
High bay LED fittings are hung from the roof steel on chains or brackets, aimed down the aisles, and reached with a scissor lift or boom under a work plan. The work includes mounting height and racking layout measured before fittings are chosen; beam angle matched to the width and height of each aisle; fittings hung from purlins or trusses with a secondary safety wire.
Can high bays be changed while the warehouse is working?
We work one aisle or one bay at a time, close it off while the lift is in use and hand it back before moving on. The sequence is agreed with your operations manager so picking routes stay open.
How high can your team work?
The limit is set by the access equipment that the floor and the aisle widths allow. At the site visit we measure the height, check the floor loading and door sizes, and choose a scissor lift or boom to suit.
How much does warehouse high bay lighting cost in Arjan, Dubai?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides warehouse high bay lighting in Arjan, Dubai?
The MELLS provides warehouse high bay lighting in Arjan, Dubai. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does warehouse high bay lighting take?
Typically agreed at the site visit and planned around your trading hours. The time for your property is confirmed with the quotation.
Is a permit needed for lighting work in a tower or mall in Arjan, Dubai?
Towers and malls normally ask for a work permit, and a retail unit has to follow the landlord fit out guide. We identify what applies at the site visit and prepare the paperwork the building or the landlord asks for.
Should every light in a room be the same colour?
Within one room, yes. Warm white suits living rooms and bedrooms, and neutral white suits kitchens and work areas. Two whites on one ceiling look patchy, so we read the colour temperature printed on each lamp before it is fitted.
Do you fix and install lights in Arjan, Dubai?
Yes. Our own technicians replace single fittings and install complete lighting in villas, apartments, offices and shops across Dubai. A site visit confirms the ceiling type, the fixing points and the circuit before the scope is put in writing.
Do you arrange the building permit in Arjan, Dubai?
Yes. Most buildings ask contractors for a work permit, trade licence, insurance and staff IDs, and a service lift booking. We submit all of it for you.
Do you clean offices in Barsha Heights?
Yes. We run daily and weekly office cleaning contracts in Barsha Heights, scheduled before or after working hours.
How do I choose a company for warehouse high bay lighting in Arjan, Dubai?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
Can you come to Arjan, Dubai at short notice?
Yes. Crews travel from our Barsha Heights base, and urgent work in Dubai is attended within two hours between 08:00 and 19:00, Monday to Saturday.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.