Fit Out & Renovation
Majlis Fit Out in Palm Jumeirah
A majlis is fitted out for receiving guests: seating around the walls, a decorated ceiling, wall panelling, concealed lighting and its own entrance where the villa allows. The MELLS carries this out in Palm Jumeirah with its own directly employed team and a named supervisor. Book a site visit and you receive a written quotation before any work begins.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday

Majlis Fit Out at a glance
| Service | Majlis Fit Out |
|---|---|
| Location | Palm Jumeirah, Dubai |
| Property types | Villas and apartments |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | Quoted per project, typically 1 to 6 weeks depending on scope and approvals |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
A fit out company for villas, apartments, offices and shops, building ceilings, partitions, joinery, flooring and finishes with its own trades. Most fit out delays in Dubai come from permits, building access rules and trades waiting on each other. We identify the approvals your building, master developer or the authorities ask for at the site visit, prepare that paperwork, and run every trade under one supervisor to a written programme.
- Seating run and corner units set out on the floor first
- Ceiling centrepiece, cornices and cove lighting built in gypsum
- Wall panelling in timber, fabric or painted mouldings
- Sockets and a serving point placed clear of the seating line
How we carry out majlis fit out
The room is set out from the seating. Continuous sofas or floor cushions run round the perimeter, so the length of each wall, the door positions and the depth of the seat are drawn before anything else. The ceiling is usually the showpiece, a framed gypsum centre with cornices, cove lighting and a chandelier point with its own fixing to the slab. Panelling, arches or carved screens made in the joinery workshop go on next, then carpet or stone, then the upholstery.
A majlis sits empty for days and is then full of people for an evening, and the AC has to cope with both. Undersized cooling shows at the first gathering. Heavy chandeliers hung from the gypsum frame alone are a risk, so the fixing goes to the concrete. Incense and oud smoke mark pale ceilings and fabric over time, which is worth knowing when choosing colours. The site visit checks the AC capacity and the slab above, and whether a new external door needs the developer to agree.
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Talk to a supervisor about majlis fit out today.
Why choose The MELLS for majlis fit out
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Method | Parts replaced until the fault goes away | The fault is found, measured and explained before any part is replaced |
| Handover | The job ends when the crew leaves | A measured test for every job, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every majlis fit out job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
A measured test for every job, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
Majlis Fit Out in Palm Jumeirah: what we plan for
Palm Jumeirah is two different places for a service crew. The fronds are lined with Garden Homes and Signature Villas, each backing onto a private beach. The trunk and crescent hold apartment buildings such as Shoreline, Golden Mile, Tiara, Oceana and Marina Residences, along with branded residences and hotels.
Salt air reaches every surface on the Palm. It leaves a film on glass, dulls metal and breaks down exterior paint faster than inland. Beach sand is walked indoors daily, and summer humidity encourages mould around AC vents and in bathroom silicone. Coastal air shortens the life of outdoor AC units, pumps and fittings, so we check for corrosion at every service and wash condenser coils.
Each frond has its own security gate where contractors are registered against the villa number. Apartment buildings require a work permit from building management and a service lift booking. Exterior work on villas needs approval from the master developer.
What your quotation depends on
A quotation for majlis fit out in Palm Jumeirah follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related Fit Out & Renovation services in Palm Jumeirah
Each one has its own scope and method.
Office Fit Out
Villa Renovation
Apartment Renovation
Kitchen Renovation
Bathroom Renovation
Retail Fit Out
Restaurant Fit Out
Joinery
Flooring Installation
Turnkey Fit Out
Fit Out Design and Space Planning
Fit Out Approvals and Permits
Fit Out Snagging and Handover
Penthouse Renovation
Townhouse Renovation
Bedroom Renovation
Living Room Renovation
Home Office Fit Out
Home Cinema Room Fit Out
Fitted Wardrobes and Walk in Closets
Custom Kitchen Cabinets
TV Wall and Media Units
Wall Panelling and Cladding
Staircase and Balustrade Works
Majlis Fit Out across Palm Jumeirah
Questions about majlis fit out in Palm Jumeirah
What does majlis fit out include?
A majlis is fitted out for receiving guests: seating around the walls, a decorated ceiling, wall panelling, concealed lighting and its own entrance where the villa allows. The work includes seating run and corner units set out on the floor first; ceiling centrepiece, cornices and cove lighting built in gypsum; wall panelling in timber, fabric or painted mouldings.
Can a majlis have traditional floor seating and sofas?
Yes, many are built with both. A low seating area with cushions and armrests takes one side and sofas the other, or the floor seating is made as loose units that store away. We draw the options to scale so you can see how many guests each seats.
How is a heavy chandelier fixed in a majlis ceiling?
It hangs from an anchor in the concrete slab, never from the gypsum. A hook or plate is fixed before the ceiling is closed and the cable is left at that point. Give us the weight of the fitting at the design stage.
How much does majlis fit out cost in Palm Jumeirah?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides majlis fit out in Palm Jumeirah?
The MELLS provides majlis fit out in Palm Jumeirah, Dubai. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does majlis fit out take?
Typically quoted per project, typically 1 to 6 weeks depending on scope and approvals. The time for your property is confirmed with the quotation.
Can we stay in the property during the renovation?
For a single room or one bathroom, usually yes, with the work area sealed off and cleaned down each day. For a whole home renovation we recommend moving out until handover.
Do you carry out fit out and renovation work in Palm Jumeirah?
Yes. Our own trades work across Dubai, and the site visit confirms the access rules, working hours and approvals that apply to your building or community.
Do I need a permit to renovate my home or office?
Often, yes. Buildings, master developers and in some cases the authorities ask for approval before fit out work starts. We identify what applies at the site visit and prepare the paperwork they ask for.
How do your crews get access to Palm Jumeirah?
Each frond has its own security gate where contractors are registered against the villa number. Apartment buildings require a work permit from building management and a service lift booking. Exterior work on villas needs approval from the master developer.
How do your crews get onto the fronds?
The resident registers our team with frond security. We send staff names, Emirates ID details and the vehicle plate the day before.
How do I choose a company for majlis fit out in Palm Jumeirah?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
Can you come to Palm Jumeirah at short notice?
Yes. Crews travel from our Barsha Heights base, and urgent work in Dubai is attended within two hours between 08:00 and 19:00, Monday to Saturday.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.
