Fit Out & Renovation
Fit Out Snagging and Handover in Masdar City
Snagging is a room by room inspection at the end of a fit out. Every defect is listed, photographed, put right and checked again before the keys change hands. The MELLS carries this out in Masdar City with its own directly employed team and a named supervisor. A supervisor visits first, and the written quotation follows before any work begins.
- Quotation
- Written, after a visit
- Response
- By appointment
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday

Fit Out Snagging and Handover at a glance
| Service | Fit Out Snagging and Handover |
|---|---|
| Location | Masdar City, Abu Dhabi |
| Property types | Apartments |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | Quoted per project, typically 1 to 6 weeks depending on scope and approvals |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Visits in Abu Dhabi by appointment, Monday to Saturday |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
A fit out company for villas, apartments, offices and shops, building ceilings, partitions, joinery, flooring and finishes with its own trades. Most fit out delays in Abu Dhabi come from permits, building access rules and trades waiting on each other. We identify the approvals your building, master developer or the authorities ask for at the site visit, prepare that paperwork, and run every trade under one supervisor to a written programme.
- Each room walked with a printed plan and a strong torch
- Doors, drawers, taps, sockets and lights operated one by one
- Snags numbered, photographed and assigned to a trade
- Handover file with drawings, finishes list and care notes
How we carry out fit out snagging and handover
The foreman walks the job before the client does. Each room is checked from the ceiling down under a raking torch, which shows roller marks, uneven joints and hollows that overhead light hides. Every door is opened and closed, every drawer pulled, every tap run and every socket tested. Snags are numbered on a plan, photographed and given to the trade responsible. When they are closed the space is cleaned, and the client walk round is held against the same list and the 14 Point Standard.
A fit out handed over unsnagged shows its faults in the first month: a door that binds once the AC has dried the timber, silicone missed behind a basin, a ceiling access panel painted shut. In a tower, the building usually carries out its own inspection too and asks for as built drawings. The MELLS also snags work done by others, as an independent list you can hand to your contractor. At the site visit we agree which drawings and scope the handover will be measured against.
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Talk to a supervisor about fit out snagging and handover today.
Why choose The MELLS for fit out snagging and handover
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Method | Parts replaced until the fault goes away | The fault is found, measured and explained before any part is replaced |
| Handover | The job ends when the crew leaves | A measured test for every job, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every fit out snagging and handover job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
A measured test for every job, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
Fit Out Snagging and Handover in Masdar City: what we plan for
Masdar City is a planned low carbon district near the airport, built with narrow shaded streets and low rise buildings. Its homes are mainly apartments and townhomes in Oasis Residences One and Two, The Gate and Leonardo Residences.
The city is surrounded by open desert, so fine sand blows through the streets and settles on balconies, screens and window ledges. Shaded courtyards stay cooler but slower to dry after washing or rain. Filters and coils clog with fine desert dust faster here than on the coast, so AC servicing is planned more often, with drains and fan coil units checked at the same visit.
Residential buildings ask for a work permit and a lift booking through management, and townhomes in gated clusters need the resident to register our crew. These are confirmed at the site visit and we prepare the paperwork asked for.
What your quotation depends on
A quotation for fit out snagging and handover in Masdar City follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related Fit Out & Renovation services in Masdar City
Each one has its own scope and method.
Office Fit Out
Villa Renovation
Apartment Renovation
Kitchen Renovation
Bathroom Renovation
Retail Fit Out
Restaurant Fit Out
Joinery
Flooring Installation
Turnkey Fit Out
Fit Out Design and Space Planning
Fit Out Approvals and Permits
Penthouse Renovation
Bedroom Renovation
Living Room Renovation
Home Office Fit Out
Home Cinema Room Fit Out
Fitted Wardrobes and Walk in Closets
Custom Kitchen Cabinets
TV Wall and Media Units
Wall Panelling and Cladding
Fit Out Snagging and Handover across Masdar City
Questions about fit out snagging and handover in Masdar City
What does fit out snagging and handover include?
Snagging is a room by room inspection at the end of a fit out. Every defect is listed, photographed, put right and checked again before the keys change hands. The work includes each room walked with a printed plan and a strong torch; doors, drawers, taps, sockets and lights operated one by one; snags numbered, photographed and assigned to a trade.
Can you snag a fit out that another contractor built?
Yes. We inspect the space against the drawings and scope you give us and issue a numbered list with photographs. Who carries out the repairs, your contractor or our team, is your decision, and we can quote for them after the inspection.
What happens to defects found after handover?
Tell us and the foreman returns to look. A failed check under the 14 Point Standard is put right within 48 hours at no charge. Items that come from wear, alterations by others or a leak from elsewhere are reported to you with a separate quotation.
How much does fit out snagging and handover cost in Masdar City?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides fit out snagging and handover in Masdar City?
The MELLS provides fit out snagging and handover in Masdar City, Abu Dhabi. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does fit out snagging and handover take?
Typically quoted per project, typically 1 to 6 weeks depending on scope and approvals. The time for your property is confirmed with the quotation.
Do you carry out fit out and renovation work in Masdar City?
Yes. Our own trades work across Abu Dhabi, and the site visit confirms the access rules, working hours and approvals that apply to your building or community.
Do I need a permit to renovate my home or office?
Often, yes. Buildings, master developers and in some cases the authorities ask for approval before fit out work starts. We identify what applies at the site visit and prepare the paperwork they ask for.
Can you build from drawings prepared by our designer?
Yes. We build from your designer's drawings and specifications, and raise any buildability questions before the quotation is issued.
Do you arrange the building permit in Masdar City?
Yes. Most buildings ask contractors for a work permit, trade licence, insurance and staff IDs, and a service lift booking. We submit all of it for you.
Do you work in Oasis Residences and The Gate?
Yes. We arrange the building permit and lift booking with management, and visits are by appointment, Monday to Saturday, 08:00 to 19:00.
How do I choose a company for fit out snagging and handover in Masdar City?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
How are visits to Masdar City arranged?
Visits in Abu Dhabi are booked by appointment between 08:00 and 19:00, Monday to Saturday. Call or send the form and we agree the earliest time a supervisor can come to you.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.
