Electrician Services
Electrical Thermal Imaging Inspection in Dubai
An infrared scan of distribution boards, breakers and connections while they are under load. It shows overheating joints before they fail, so it suits checks ahead of summer and at handover. Available across Dubai, with a two hour response for urgent work, and in the prime communities of Abu Dhabi by appointment. A supervisor visits first, and the written quotation follows before any work begins.
- Quotation
- Written, after a visit
- Response
- 2 hours in Dubai
- Quality checks
- 14 on every job
- Service
- Gold rated
5.0 on GoogleFully insuredNo subcontractorsOpen 08:00 to 19:00, Monday to Saturday
Electrical Thermal Imaging Inspection at a glance
| Service | Electrical Thermal Imaging Inspection |
|---|---|
| Location | Dubai and the prime communities of Abu Dhabi |
| Quotation | In writing, after a site visit and before any work begins |
| Typical duration | 1 to 3 hours for most faults and small installations, with rewiring quoted per project |
| Team | Crew directly employed by The MELLS, with a named supervisor |
| Quality check | A measured test for every job, with photographs before and after |
| If a check fails | It is put right free of charge within 48 hours |
| Response | Two hours in Dubai for urgent work, planned work within 48 hours |
| Hours | 08:00 to 19:00, Monday to Saturday |
| Booking | Book a site visit on this page, call +971 55 444 0084 or email contact@themells.ae |
What is included
Electrician services for homes, offices and shops, covering fault finding, distribution boards, lighting, sockets, rewiring and urgent call outs. Long AC running hours load circuits heavily through the summer, while heat and humidity work on outdoor fittings and loose terminations. Our own electricians test before they change anything and explain the fault in plain terms. Where work may need DEWA or building approval, that is identified at the site visit and we prepare the paperwork that is asked for.
- Boards scanned with covers off and the AC running
- Hot spots photographed in thermal and normal view
- Readings compared across phases and breakers
- Report with each finding ranked by urgency
How it works
The same method on every job, so the result does not depend on who is on shift.
- Survey and diagnosis. A technician inspects the system or surface, takes readings and photographs, and explains what was found in plain language.
- Written quotation. You receive a written quotation against a defined scope before any work starts. Anything outside that scope is quoted separately.
- Protected, supervised work. The work area is protected and isolated, and the job is carried out by our own technicians under a named supervisor.
- Testing. Every job ends with a measured test suited to the discipline, so the result is a reading and a photograph and not an opinion.
- Report and warranty. The completed report reaches you within the hour. Any failed point is put right free of charge within 48 hours.
Talk to a supervisor about electrical thermal imaging inspection today.
Why choose The MELLS for electrical thermal imaging inspection
What an ordinary job leaves out, and what you can hold us to.
| Point | An ordinary job | The MELLS |
|---|---|---|
| Quotation | A figure over the phone, with extras added on the day | A written quotation after a site visit, and nothing added on the day |
| Team | Crews supplied through agencies or subcontractors | Crew directly employed by The MELLS, with a named supervisor |
| Method | Parts replaced until the fault goes away | The fault is found, measured and explained before any part is replaced |
| Handover | The job ends when the crew leaves | A measured test for every job, with photographs before and after |
| Aftercare | A return visit is charged | A failed check is put right free of charge within 48 hours |
Our commitments on every electrical thermal imaging inspection job
The same standard on a single room or a whole estate.
Written quotation
The scope is fixed in writing before any work begins.
Named supervisor
One person is responsible for your job from the visit to handover.
Checked before handover
A measured test for every job, with photographs before and after.
Put right within 48 hours
If a check fails, we come back and correct it free of charge.
Fully insured
Our work in your home or premises is covered by insurance.
Discreet crews
Uniformed, briefed on your house rules and respectful of your privacy.
What your quotation depends on
A quotation for electrical thermal imaging inspection follows a site visit. The supervisor looks at the points listed here and you receive a written quotation with a defined scope before any work begins. Once you accept it, nothing is added on the day.
- Size and type of the system or surface
- Present condition and ease of access
- Parts and materials specified
- One visit or a retained contract
Related Electrician Services services in Dubai and Abu Dhabi
Each one has its own scope and method.
Electrical Thermal Imaging Inspection by community
Show all 69
Questions about electrical thermal imaging inspection
What does electrical thermal imaging inspection include?
An infrared scan of distribution boards, breakers and connections while they are under load. It shows overheating joints before they fail, so it suits checks ahead of summer and at handover. The work includes boards scanned with covers off and the AC running; hot spots photographed in thermal and normal view; readings compared across phases and breakers.
How much does electrical thermal imaging inspection cost in Dubai?
We do not publish prices, because no two jobs are the same. The main factors: size and type of the system or surface; present condition and ease of access. Book a site visit: a supervisor from The MELLS looks at the work and you receive a written quotation with a defined scope before anything begins.
Who provides electrical thermal imaging inspection in Dubai?
The MELLS provides electrical thermal imaging inspection in Dubai. The work is carried out by people The MELLS employs directly, under a named supervisor, 08:00 to 19:00, Monday to Saturday. To arrange it, book a site visit on this page or call +971 55 444 0084.
How long does electrical thermal imaging inspection take?
Typically 1 to 3 hours for most faults and small installations, with rewiring quoted per project. The time for your property is confirmed with the quotation.
Why does my breaker keep tripping in summer?
Usually because AC units, water heaters and kitchen appliances together draw more than the circuit was designed for, or because a breaker or connection has weakened with heat. We measure the load before recommending anything.
Does electrical work need DEWA approval?
Some work may, for example changes that affect the connected load or the main supply. We identify this at the site visit and prepare the paperwork that DEWA, the building or the community asks for.
Can you add sockets or lights without damaging finished walls?
Often, yes. We look for existing conduits, ceiling voids and routes behind joinery first. Where cutting into a wall cannot be avoided, the quotation says so and describes how the surface will be made good.
Is it safe to reset a tripped breaker myself?
Once is reasonable. If it trips again, leave it off and call us, because a breaker that will not hold is reporting a real fault. Never tape or wedge a breaker in the on position.
How fast can an electrician get to Dubai?
A loss of power, a burning smell or a sparking socket is treated as urgent, which means a two hour response in Dubai from 08:00 to 19:00, Monday to Saturday.
How do I choose a company for electrical thermal imaging inspection in Dubai?
Ask four things: who employs the people who will come, whether the scope is written down before work starts, how the result is checked, and what happens if something is missed. The MELLS uses its own staff, quotes in writing after a site visit, checks every job (a measured test for every job, with photographs before and after) and puts right any failed check free of charge within 48 hours.
How do I prepare for electrical thermal imaging inspection?
Clear access to the units, panels or areas to be worked on and note any faults you have noticed. The supervisor confirms anything else at the site visit.
Do I need to provide any products or equipment?
No. Products, tools and machines come with the crew. Any materials the job needs, such as paint or parts, are listed in the written quotation.
What if I am not happy with the result?
Tell the supervisor at handover or call us. Anything that fails our check is put right free of charge within 48 hours.
Page updated by The MELLS, Damac Executive Heights, Barsha Heights, Dubai.